Provides sufficient Wall Inlets to provide coverage for a finished basement. Purchase of Central Vac System option for 1st & 2nd floors is required.

This option allows the homeowner to install the “vacuum piping only” now and purchase the vacuum motor and other components later. This option provides future inlet locations on the first and second floors as well as the basement of the home. Basement walls must be roughed in while the house is still undergoing its original construction.

The addition of optional rooms in your new home may necessitate additional vacuum inlets.

Purchasing additional sets of cleaning tools allows you to leave a set on Central Vacuum Systemseach floor.
Includes:

• Standard CT-350B Air Driven Twin Turbine Floor Brush
• Standard CK-120 Tool Set
• Standard CH-235 30’ Hose

This kit was designed to meet your cleaning demands in your garage andCentral Vacuum Systems automobile. With a 50’ Bright Orange Crush-Proof Hose and a complete set of vacuum tools to leave in the garage, you’ll never have to worry again about accidently tracking grease and mud back into the home when you’re done cleaning.Includes:

• # 360 Standard Vacuum Inlet in the Garage
• 50’ Bright Orange Crush-Proof Hose for access
• to every car in the garage.
• Round Dusting Brush with Tough Extra Long Bristles
• Upholstery Tool
• “Gulper” Extra Wide Crevice Tool
• Hose Hanger
• See-Thru Mesh Tool Storage Bag

This soft fabric sleeve completely covers your vacuum hose, protecting the legs of your furniture from white scuff marks that may be caused by the hose on certain dark furniture finishes. (Hose shown is not included.)

This hand-held turbine brush is the perfect stair tool or for small areas such as furniture. It is comfortable and easy to handle.Central Vacuum Systems CT-330B

The flip of a toe-switch turns on this automatic dustpan allowing you to quickly sweep away dirt. While the Vac Pan is most popular in the kitchen / mud room area of the house, mounted in the base of a 2 x 6 wall or certain cabinets, it is equally at home in the master bath or any other area that needs to be swept frequently.* IMPORTANT NOTICE:

The installation of a Vac Pan varies with every location it is placed in. The home buy must inform their builder if they purchase this option so that the builder can make the appropriate adjustments during construction in order to allow for flooring thickness, cabinet base openings, etc. to accommodate the Vac Pan. A common problem experienced when installing Vac Pans occurs when ceramic tile is installed on the kitchen or bathroom floor, but not installed under the base of the cabinet where the Vac Pan is to be located. This reduces the space between the floor and the bottom shelf of the cabinet and prevents the Vac Pan from working properly. The home buyer is responsible for making sure that their builder is aware that this option is to be installed and has made the appropriate allowances to accommodate it. Failure to do so may result in the Vac Pan not operating properly.

This Deluxe option upgrades the main floor-cleaning tool in your system, the Air Driven CT-350B Floor Brush, to the powerful Electric Motor Driven Floor Brush, the CT-600. The CT-600 is especially recommended for use with medium to deep pile carpeting. The motorized unit provides all the beater-sweeper action of the best upright available. To complement this deluxe floor brush and upgrade all the tools, the Standard CH-235 Vacuum Hose is replaced with the Deluxe CH-515 Hose and the Standard CK120 Tool Set is replaced with the Deluxe CK230 tool Set. The CH-515 includes additional features such as an ergonomic handle with fingertip control of the entire system. In addition to allowing you to turn the system on and off while the hose is still inserted in the wall inlet, you can easily adjust the vacuum pressure in order to go from vacuuming the floor at full suction to vacuuming upholstery with lower suction.

This option requires electrical outlets, near each vacuum inlet, in order to plug in the electrical cord portion of the hose to power your new tools.

This option provides an additional complete set of cleaning tools, including the CT-600 floor brush and CH-510 hose described above, as well as the CK-230 tool set. An additional tool set on each floor adds to the convenience of a central cleaning system.

( 06-020-VX3916 for the VX-475 unit )
( 06-020-VX3918 for the VX-550 and VX-1000 unit )
These two ply electro statically charged filter bags capture particles down to .10 micron while allowing the vacuum air and remaining particles to exhaust outside your home. On the average, nationally, you will only need to replace the bag about twice a year. When you first move into your new home, however, because of the power of the NuTone Central Cleaning System, its ability to capture such small particles, the initial fiber loss from new carpeting and the general debris generated by moving in, you may need to change your filter bag after just a few weeks. Remember, filling the bag sooner than you might expect is evidence of the power and effectiveness of your new NuTone Cleaning System. Check the filter bag frequently when you first move in.